English
- English
- Français
- Deutsch
- Русский
- Español
- Português
- Polski
- ไทย

Precast Concrete Formwork

Rubber Recess Former For Lifting System

LSC Rubber Recess Former can be used multiple times. The load mark on the former is easy for identification of the load group. Different color also can be provided. A permanent thread stud with one wing nut to tighten against the form to hold the former securely.

Item No :
Rubber Recess Former For Lifting System
Order(MOQ) :
1
Product Origin :
China
Lead Time :
7days

Inquiry now

Product Details

Introduction of Rubber Recess Former For Lifting System:

Rubber Recess Former are made of rubber and have a hemispherical shape. It is designed to open to allow the insertion of pin anchors, and once closed, it provides an adequate seal to prevent concrete from entering. After the concrete is poured and cured, the groove formers are removed to reveal the pin anchors in their pockets. Rubber Recess Former should be oiled and can be used multiple times. Rubber Recess Former are used for easy fixing to formwork. The rubber groove formed in the open position will be placed on the anchor head. Closing the rubber groove former will hold the anchor securely. The rubber groove formers can then be secured to the formwork with the anchors. To secure ball head jacking anchors or installation/deployment anchors to formwork, rubber groove formers must be used. This ensures easy and secure positioning of the anchor and prepares the anchor for the correct universal head lift linkage.

Additionally, formers are available in narrower widths to facilitate placement in thin panels. The former is also available as a non-hinging product with an alternative method of holding the pin anchor in place.

Rubber Recess Former For Lifting System

Specification of Rubber Recess Former:

Rubber Recess Former can be used multiple times.

The load mark on the former is easy for the identification of the load group.

Different colors also can be provided.

A permanent thread stud with one wing nut to tighten against the form to hold the former securely.

Rubber Recess Former Specification of Rubber Recess Former

Characteristics of Rubber Recess Former:

1. Even when heated to 120 ℃ or in contact with oil, the shape remains unchanged.

2. Can be used multiple times.

3. Install the lifting clutch during the casting process.

Made of durable rubber compound, ensuring a long service life when in contact with concrete.

5. The size of each groove forming machine is uniquely designed according to the corresponding lifting clutch load classification to minimize the risk of errors.

Characteristics of Rubber Recess Former

Application of Rubber Recess Forme：

Application of Rubber Recess Forme

Other Lifting System Hot Sale:

Tags :

Leave A Message

Categories

New products

Related Products

LSC-450 shuttering magnet box

Shuttering Magnet consists of Neodymium Magnet with push down- up handle button. Concrete magnet boxes retain enormous magnetic force and are widely used in concrete precast industries. The use of concrete magnets is very simple. just push the button down and the concrete magnet will firmly catch with the steel frames. Use a lifting lever tool when removing the concrete magnet. Using our expertise in magnetic components and experience in supporting for the prefabricated building industry, we have already developed magnetic shuttering for precast concrete production.

LSC-600 Precast Concrete Shuttering Magnet For Concrete Formwork

As an important accessory of precast concrete system, precast concrete magnets are used to fix panels when pouring concrete molds, especially 2100KG precast concrete magnets are the most used size among all products in European and American countries. Prefabricated Concrete Magnet is suitable for all formwork constructions like steel and plywood formwork systems with appropriate adapters as it consists of permanent strong permanent magnets (neodymium magnets) in shielded steel or iron boxes. The staff can control the on/off of the magnetic adsorption force by pressing the button above the middle of the magnetic box. On-site operation is very simple and convenient. The new precast concrete technology has many advantages over the old cast-in-place model. Thanks to these excellent performances, the green business economy is being adopted by many construction companies as a new way of working in Europe, South America, India and now also in China. With the development of precast concrete technology, it has been widely used in floors, walls and even roofs from private houses to giant buildings, with higher durability, flexibility and economy. The suction force of the magnetic box we provide is from 450-3100KG. There are various styles and can be customized.

800KG Precast Concrete Magnets for Sandwich Panel Wall Panel Formwork System

LSC-800 Shuttering Magnet, Precast Concrete Magnets for Sandwich Panel Wall Panel Formwork System

Precast concrete magnets are a useful and high-tech method of fixing formwork to the casting bed. They are made from rare earth materials, which give higher pull-off strengths than other magnet materials. The magnets are designed so that the magnetic portion is layered with steel to spread the magnetic flux and thereby increase the contact area. Housings then surround the magnet to protect against damage, or the steel may be used to bolt a housing to the magnet. Care should be taken when using the magnet to ensure the base is clean and free from debris. This debris causes a loss of strength due to a large air gap forming between the magnet and the bed.

LSC-9ookg Concrete Shuttering Magnet

Precast concrete magnets are very popular in modern civil engineering. It is the ideal solution for almost all precast concrete formwork structures. The precast concrete magnet consists of a metal casing, a magnetic system, and an effective pull-open and close button. LSC has 10 years of production and export experience, customization is available, OEM&ODM, good inventory, and quick delivery.

LSC-1000KG Precast Concrete Shuttering Magnet

The precast concrete shuttering magnet is one of the most important precast concrete magnetic components, and its main function is to fix the side formwork to the formwork table during the concrete pouring process. With the rapid development of the prefabricated construction industry at home and abroad, more and more customers abandon the traditional fixing method of screw drilling, and adopt clean and green magnetic fixing solutions. Combining our many years of experience in supplying foreign customers, we According to the actual production requirements of customers, magnetic boxes of various specifications are designed for customers to choose, such as 600 kg, 800 kg, 1000 kg, 1350 kg, 2100 kg, etc.

LSC-1350KG Precast Concrete Magnet

The precast concrete formwork magnet is one of the most important magnetic components of precast concrete, which mainly functions to fix the side formwork to the formwork platform during the concrete pouring process. With the rapid development of the prefabricated onstruction industry both domestically and internationally, more and more customers are abandoning traditional screw drilling fixation methods and adopting clean and green magnetic fixation solutions. Our template magnet LSC-1350 is a useful and high-tech method for fixing templates to the pouring table. It is made of rare earth material neodymium magnet, which has higher tensile strength than ordinary magnet materials. The magnet is specially designed with steel on the magnetic part to disperse the magnetic flux and increase the contact area. The shell surrounds the magnet to prevent damage, or steel can be used to secure the shell to the magnet. Be careful when using magnets to ensure that the bottom and tabletop are clean and free of debris. Due to the large air gap formed between the magnet and the bed, these fragments can cause strength loss.

LSC-2100KG Precast Concrete Magnet

As an important accessory of precast concrete system, precast concrete magnets are used to fix panels when pouring concrete molds, especially 2100KG precast concrete magnets are the most used size among all products in European and American countries. Prefabricated Concrete Magnet is suitable for all formwork constructions like steel and plywood formwork systems with appropriate adapters as it consists of permanent strong permanent magnets (neodymium magnets) in shielded steel or iron boxes. The staff can control the on/off of the magnetic adsorption force by pressing the button above the middle of the magnetic box. On-site operation is very simple and convenient. The new precast concrete technology has many advantages over the old cast-in-place model. Thanks to these excellent performances, the green business economy is being adopted by many construction companies as a new way of working in Europe, South America, India and now also in China. With the development of precast concrete technology, it has been widely used in floors, walls and even roofs from private houses to giant buildings, with higher durability, flexibility and economy. The suction force of the magnetic box we provide is from 450-3000KG. There are various styles and can be customized.

MagFly Magnet Compact Solution for Positioning Magnetic Force 2000kg

Magnetic Shuttering Solutions For Precast Concrete Formworks,Precast Side Form Magnetic clamp 1oookg, Shuttering Magnet Mayfly,Universal Magnet, Magnetic Box Clamping Magnet, Side-forms Holding Magnets, SUPER STRONG LIGHTWEIGHT MAGNET, high retaining force standard magnet, Tailor-made Concrete Formwork Magnet China Supplier.

Contact Us

No. 61 Linbailing Road, Caoban Village, Jingcheng Town, Nanjing County, Fujian Province

Hot Tags

Follow Us

Newsletter

Follow us at

Leave A Message

Leave A Message

Our hours

Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)

Home

Products

contact

Precast Concrete Formwork

Rubber Recess Former For Lifting System