Lifting System For Precast Concrete Unit

Coil Loop Insert is a versatile insert typically used for structural connections and as anchors for the suspension of pipes and/or other mechanical equipment. See the table below for available bolt diameters and lengths. Theinert offers plain or hot dip galvanized finishes. Safe working loads shown are based on 3,000 PSI concrete with a 3:1 safety factor. Although simple in design and fabrication, the B16 Straight Coil Loop Insert is highly efficient for lifting and handling precast concrete elements. Dayton Superior Coil Loop Inserts are made of a single looped wire welded to a helix coil. They are available in 1/2" to 1" diameters suitable for many concreting applications.

The erection anchor is designed for use with precast units during the lifting and turning/edge handling process. If desired, the anchor uses a shear plate and tension bar that wraps through the anchor to distribute the load in the concrete. Erection anchors allow the lifting of columns, beams, walls, and other precast concrete elements. The mounting anchors can be used in all lifting directions and for lifting angles up to 90 degrees. LSC has various styles of erection anchors. The style, size, and tonnage of the installation anchor are the same as ALP, but our price is more than half cheaper than ALP. We only accept wholesale, not retail. If you are interested.

The recess formers are used for easy attachment to the formwork. The rubber recess formed in the open position will be put over the anchor head. Closing the rubber recess former will fix the anchor tightly. Afterward, the recess former can be fixed to the formwork together with the anchor. Using these magnetic groove members eliminates the need to drill holes in the formwork to install screws or weld plates to the formwork. This magnetic-based process can significantly reduce form setup time and form reconfigurability, improving process efficiency and reducing production costs. The recess former is constant in shape even when heated up to 120℃ or in contact with oil. It can be used several times. To ease the identification of the load group, the formers are produced in different colors. 

Brief Description of Precast Concrete Lifting Anchors： Lifting Anchors, Clutches and accessories make lifting concrete components easy, efficient, and safer during transportation, rigging, and lifting of precast concrete elements. The Lifting Anchors system utilizes a fully engineered approach combining cast-in lifting anchors, recess formers, and custom-fitting lifting clutches. Using the Lifting Anchors system results in fewer failures, saving time and costs due to damage or construction delays. Lifting Anchor is the most versatile and widely used anchor in the Lifting Anchor range. Available in a wide range of Working Load Limits (WLL), all Lifting Anchor comply with AS 3850.1:2015.

LSC Rubber Recess Former can be used multiple times. The load mark on the former is easy for identification of the load group. Different color also can be provided. A permanent thread stud with one wing nut to tighten against the form to hold the former securely.

Recess Former Magnet, Magnetic Recess Former, Construction Lifting & Fixing Systems recess former, Magnetic Steel Recess Former, Capstan Magnetic Recess Former Metal,  Swift lift Foot Anchor Magnetic Recess Former, Monoblock lifting anchor,  Solid Steel Type Magnetic Former, Capstan Magnetic Recess Former Metal, Recess Magnets, Precast Construction Magnets

The Magnetic Recess Former metal is used for fixing round anchors in steel precast concrete panel, supported by high powerful permanence magnets. They are suitable in Capstan lifting anchors from 1.3t to 10.0t and even 20.0t or 26.ot for customers requirements.

Precasting Concrete Lifting Ring Clutch are specialized lifting devices used to safely handle and transport precast concrete elements. These clutches are designed to work with Erection Anchors embedded in the concrete, ensuring secure attachment and efficient lifting operations.

Precast concrete lifting clutches are specialized lifting devices used to safely handle and transport precast concrete elements. These clutches are designed to work with lifting anchors embedded in the concrete, ensuring secure attachment and efficient lifting operations.